DIY 110V Controller + RF Remote for LED Neon Light Warm White(2700K)

The DIY Outlet Neon Rope Light Controllers come in two configurations to match any project scale, a single-outlet model for quick accent jobs and a 2-way splitter that drives 150ft per side, 300ft total, so you can cover long banquet hall perimeters without load calculations or multiple drivers. Fewer splices translate to fewer junction boxes and much cleaner wire routing from start to finish. Both options are equipped with a UL-approved plug and integrated overcurrent protection, eliminating concerns about melted receptacles or costly service callbacks down the line. 

FEATURES

• Choose between single-outlet for shorter runs or the 1-in-2-out splitter for longer layouts, meeting exactly what each job requires
• 1 to 2 way splitter eliminates the need for multiple drivers, cutting splices and junction boxes in half for faster, cleaner installs
• Handles 150ft per leg and 300ft combined, so you can skip the derating math and wire with full confidence from the start
• UL-listed plug and power cord for electrical safety, so you won't get called back for melted outlets or burning smells later
• RF remote control for easy switching on/off, adjusting brightness & selecting lighting modes
• Compatible with DIY Warm White Neon Rope Lights ONLY (10ft, 50ft, 100ft, and 150ft), please contact our customer service if need help

SPECIFICATIONS

• 1-Way LED Controller:
  • Control Box Dimension(LxWxH): 3 3/4" x 2 9/16" x 1" (9.5 x 6.5 x 2.5 cm)
  • Power Cord Length: 23 5/8" (60 cm)
  • Max. Run Length: 150 ft (45 m)
  • Voltage: 110 V
  • Max. Power: 750 W
  • Net Weight: 0.44 Lb (0.2 kg)
• 2-Way Splitter LED Controller:
  • Control Box Dimension(LxWxH): 5.7" x 2.6" x 1.6" (14.5 x 6.5 x 4 cm)
  • Cable Length: 23.6" (60 cm)
  • Max. Run Length: 150 ft (45 m) per outlet; 300 ft (90 m), both outlets combined
  • Voltage: 110 V
  • Max. Power: 1500 W
  • Net Weight: 0.77 Lb (0.35 kg)

PACKAGE CONTENTS

• 1-Way Controller:
  • 1x Control Box; 1x Remote Controller
  • 1x Pin; 1x End Cap; 1x Manual
• 2-Way Splitter Cable:
  • 1x Control Box; 1x Remote Controller
  • 2x Pins; 2x End Caps; 1x Manual

NOTICE: Please avoid twisting or bending the LED connector terminals to prevent electrical failure. Forcing sharp angles may cause flickering, overheating or total failure of your neon rope light.

Shipping Disclaimer: Due to the size and weight of this product, it may be shipped in multiple packages. Packages may be delivered separately by the carrier.