DIY 50ft Waterproof LED Neon Rope Light Multi-Color(16) App RF Remote

You don't need to be an electrician to bring illumination to your habitation with DIY Multi-color Outdoor Neon Rope Light 50 foot. This flexible double sided light contains 108 pieces of RGB LED bulbs per meter! Each roll comes with mounting clips for easy installation and a remote control and APP control for colors, modes, brightness and music sync mode!

FEATURES

• DIY Decoration - soft and flexible; easy to bend into shapes and customize to your own decorating needs
• Multi Use - Choose from 160 million different colors, stepless brightness from 1% to 100% and four dynamic modes including strobe, flash, fade, & solid
• Energy Saving - DIY Lighting includes RF remote control to turn on/off, change color, brightness, & modes, setting timers; 20,000 hr. lifespan; low power consumption
• Music Mode via App Control - Light and color are auto adjusted according to the surrounding sound.
• Safe & Durable - Great for indoor or outdoor use featuring IP65 water-resistance and a UL certificated plug and power cable for safety
• Connectable - Mounting clips for easy installation; can be cut with scissors without damage, and extended by extra power adapters and additional lights

SPECIFICATIONS

• Length of Light Tube: 49 1/4 ft (15 m)
• Tube Size in Cross-section: 5/16" x 11/16" (8 x 18 mm)
• Power Cord Length: 2 ft (60 cm)
• Lighting Source: 108 pcs/m
• Color Temperature: 3000 K, 6500 K, 625 to 740 nm, 440 to 475 nm, 492 to 577 nm, 360 to 380 nm, 380 to 420 nm, 590 to 610 nm
• Luminous Flux: 12 to 14 lm/LED
• LED Lifespan: 20,000 hrs
• Beam Angle: 120 degrees
• Power: AC110 V, 9 W/m
• Material: PVC
• Net Weight: 7.1 lbs

PACKAGE CONTENTS

• 1x 50ft Neon Rope Light
• 25x Mounting Clips
• 2x End Caps
• 1x Remote Control
• 1x Manual

NOTICE:

• The actual colors of the light strip may slightly vary from the color buttons on the remote control.
• Please cut along the cutting marks, or the LED bulbs may be damaged.
• When connecting the 2 rope sections of the light strips to the connector, it is necessary to seal them with glue.