DIY 110V Controller + RF Remote for LED Neon Light Multi-Color(RGBW)

Whether you're wiring a short accent wall or a 300ft banquet hall perimeter, we've got you covered with two controller options. The single-outlet model keeps it simple for smaller jobs, while the 1-in-2-out splitter powers 150ft per side and 300ft total, so you can run continuous lengths without doing load calculations or adding extra drivers. Fewer splices mean fewer junction boxes to install, and cleaner wire management overall. Both controllers come with a UL-approved plug and internal overcurrent protection, so you won't be dealing with melted outlets or service callbacks down the road.

FEATURES

• Choose between single-outlet for shorter runs or the 1-in-2-out splitter for longer layouts, meeting exactly what each job requires
• 1 to 2 way splitter eliminates the need for multiple drivers, cutting splices and junction boxes in half for faster, cleaner installs
• Handles 150ft per leg and 300ft combined, so you can skip the derating math and wire with full confidence from the start
• UL-listed plug and power cord for electrical safety, so you won't get called back for melted outlets or burning smells later
• RF remote control for easy switching on/off, adjusting brightness & selecting lighting modes
• Only compatible with DIY multi-colored neon rope lights: 10ft, 50ft, 100ft, and 150ft

SPECIFICATIONS

• 1-Way LED Controller:
  • Control Box(LxWxH): 3 3/4" x 3 7/16" x 1" (9.5 x 8.7 x 2.5 cm)
  • Cable Length: 23 5/8" (60 cm)
  • Max. Run Length: 164 ft (50 m)
  • Voltage: 110V-120V AC
  • Max. Power: 1000 W
  • Net Weight: 0.44 Lb (0.2 kg)
• 2-Way Splitter LED Controller (not applicable with App):
  • Control Box Dimension(LxWxH): 5.7" x 2.6" x 1.6" (14.5 x 6.5 x 4 cm)
  • Cable Length: 23.6" (60 cm)
  • Max. Run Length: 150 ft (45 m) per outlet; 300 ft (90 m), both outlets combined
  • Voltage: 110V AC
  • Max. Power: 1500 W
  • Net Weight: 0.77 Lb (0.35 kg)

PACKAGE CONTENTS

• 1-Way Controller:
  • 1x Control Box; 1x Remote Controller
  • 1x Pin; 1x End Cap; 1x Manual
• 2-Way Splitter Cable:
  • 1x Control Box; 1x Remote Controller
  • 2x Pins; 2x End Caps; 1x Manual

NOTICE: Please avoid twisting or bending the LED connector terminals to prevent electrical failure. Forcing sharp angles may cause flickering, overheating or total failure of your neon rope light.

Shipping Disclaimer: Due to the size and weight of this product, it may be shipped in multiple packages. Packages may be delivered separately by the carrier.